LightLeaf 140W hatch panel
TOPO2 hatch
The LightLeaf panel Escapod builds into the TOPO2 hatch, rated 140 W. LightLeaf requires an MPPT controller. A PWM controller, such as the stock Zamp, drops panel voltage above the battery instead of converting it. Neither page publishes that loss, so the plan does not subtract one.
| Spec | Published | Source |
|---|---|---|
| Rated power | 140 W | Escapod, TOPO2 power options |
| Install | Integrated in the hatch, removable | Escapod, TOPO2 power options |
| Extension cord | 12 ft | Escapod, TOPO2 power options |
| Controller supplied with the TOPO2 | 30 A | Escapod, TOPO2 power options |
| Charge controller | MPPT requiredLightLeaf’s FAQ for their panels. Do not connect a panel straight to a 12 V battery. | LightLeaf Solar FAQ |
What's missing
- Neither Escapod nor LightLeaf prints the panel's voltage and current figures.
- Nobody publishes how much a simpler charge controller gives up compared with a better one. The plan uses the sun hours and efficiency you enter, and doesn't assume a controller loss.